Hitachi Hidic EH-150 Applications Manual page 75

Preliminary Rev.03
8.2 Control Register
The information to control this module operation are passed from CPU module to this module via Control area.
Figure 8.2 shows the map of the control area. The control area is structured with 10 kinds of registers. Each register
size is 1 word (16bits).
To put the data of this control area, FUN 201 command is prepared for user ladder diagram programming.
The contents of this manual might be changed without notice.
I/O No. Control Registers
+ 0 Module control
+ 1 Connection control
+ 2 Exclusive send control
+ 3 Ready/Event send control
+ 4 Exclusive receive control
+ 5 Ready receive control
+ 6 Error clear1 control
+ 7 Error clear2 control
+ 8 Error clear3 control
+ 9 Close mode control
Figure 8.2 The structure of control area
8-6
Chapter 8 Register Structure
(MDCR)
(CNCR)
(EXSR)
(RECR)
(EXRR)
(RDCR)
(EC1CR)
(EC2CR)
(EC3CR)
(CMCR)