Data Lists; Machine Data; General Machine Data; Channel-Specific Machine Data - Siemens SINUMERIK 840D sl Function Manual

N4: Punching and nibbling - only 840D sl

10.9 Data lists

10.9 Data lists
10.9
10.9.1

Machine data

10.9.1.1

General machine data

Number Identifier: $MN_
11450 SEARCH_RUN_MODE
10.9.1.2

Channel-specific machine data

Number Identifier: $MC_
20150 GCODE_RESET_VALUES[n]
26000 PUNCHNIB_ASSIGN_FASTIN
26002 PUNCHNIB_ASSIGN_FASTOUT
26004 NIBBLE_PUNCH_OUTMASK[n])
26006 NIBBLE_PUNCH_INMASK[n]
26008 NIBBLE_PUNCH_CODE[n]
26010 PUNCHNIB_AXIS_MASK
26012 PUNCHNIB_ACTIVATION
26014 PUNCH_PATH_SPLITTING
26016 PUNCH_PARTITION_TYPE
26018 NIBBLE_PRE_START_TIME
26020 NIBBLE_SIGNAL_CHECK
10.9.2

Setting data

10.9.2.1

Channel-specific setting data

Number Identifier: $SC_
42400 PUNCH_DWELL_TIME
42402 NIBPUNCH_PRE_START_TIME
42404 MINTIME_BETWEEN_STROKES
760
Description
Block search parameter settings
Description
Reset G groups
Hardware assignment for input-byte with stroke
control
Hardware assignment for output-byte with stroke
control
Mask for quick output bits
Mask for quick input bits
Determination of the M functions
Definition of punching and nibbling axes
Activation of punching and nibbling functions
Activation of automatic path segmentation
Behavior of single axes with active automatic path
segmentation
Automatically activated pre-initiation time
Monitoring of the input signal
Description
Dwell time
Pre-start time
Minimum time interval between two consecutive
strokes
Function Manual, 09/2009, 6FC5397-1BP20-0BA0
Extended Functions