M5: Measuring
8.4 Setting zeros, workpiece measuring and tool measuring
Two turning tools each with their own reference point with a tool orientation in the approach direction
In the case of the tool position of two turning tools each with their own reference point, not
only are the input variables of measurement type 23 evaluated but also the values of the
following input variables:
Approach direction and tool orientation +x
$AC_MEAS_TOOL_MASK = 0x2
$AC_MEAS_DIR_APPROACH = 0
674
Approach direction and tool orientation -x
$AC_MEAS_TOOL_MASK = 0x40
$AC_MEAS_DIR_APPROACH = 1
Function Manual, 09/2009, 6FC5397-1BP20-0BA0
Extended Functions