Close Program - Siemens SINUMERIK 840D sl Function Manual

B4: Operation via PG/PC - only 840D sl
3.2 Software installation
3.2.5

Close program

Deselect the program
The following steps must be taken to deselect the MMC 102/103 software:
1. Press function key F10
2. Press function key Shift + F9.
3. You can close the program by pressing the Exit softkey.
276
A horizontal softkey bar is displayed.
Function Manual, 09/2009, 6FC5397-1BP20-0BA0
Extended Functions