B3: Several operator panels connected to several NCUs, distributed systems - only 840D sl
2.15 Examples
2.15.6.2
Axis container rotation with an implicit part program wait
Channel 1
AXCTWE(C1)
Part program with movement of a
container axis
2.15.6.3
Axis container rotation by one channel only (e.g. during power up)
Channel 1
AXCTWED(C1)
2.15.7
Evaluating axis container system variables
2.15.7.1
Conditional branch
Channel 1
AXCTWE(CT1)
MARKER1: Part program without movement of a container
axis
IF $AC_AXCTSWA[CT1] == 1 GOTOB MARKE1
Part program with movement of a container axis
2.15.7.2
Static synchronized action with $AN_AXCTSWA
Channel 1
IDS =1 EVERY $AN_AXCTSWA[CT1] == 1 DO M99
246
Channel 2
Part program ...
Part program ...
AXCTSWE(C1)
Channel 2
In the RESET state
Comment
Channel 1 enables the axis container for rotation.
Conditional branch dependent on completion of axis
container rotation.
Comment
Static synchronized action:
Always output auxiliary function M99 at the beginning of an
axis container rotation.
References: /FBSY/, Function Manual Synchronized Actions
Comment
Channel 1 enables the axis container
for rotation.
Channel 1 waits implicitly for axis
container rotation
Channel 2 enables the axis container
for rotation, rotation occurs.
Channel 1 is continued.
Comment
Instantaneous rotation
Function Manual, 09/2009, 6FC5397-1BP20-0BA0
Extended Functions