Siemens SINUMERIK 840D sl Function Manual page 272

B4: Operation via PG/PC - only 840D sl
3.2 Software installation
4. Select turning or milling
Figure 3-5
Note
If you want to change your selection later, select the directory "mmc2" and copy "dpturn.exe"
(turning) or "dpmill.exe" (milling) into the directory "dp.exe".
5. Select drive
Only if several local disk drives are available.
Select the drive for the tmp directory (see screenshot)
Figure 3-6
Otherwise drive C:\ is selected as a default.
Note
The contents of the directory "tmp" are deleted on the installation drive with each restart of
MMC 102.
272
Select turning/milling
Select drive
Function Manual, 09/2009, 6FC5397-1BP20-0BA0
Extended Functions