Setting Data; Channel-Specific Setting Data; Signals; Signals To/From Mode Group - Siemens SINUMERIK 840D sl Function Manual

K5: Mode groups, channels, axis interchange
6.6 Data lists
6.6.2

Setting data

6.6.2.1

Channel-specific setting data

Number Identifier: $SC_
42000 THREAD_START_ANGLE
42100 DRY_RUN_FEED
6.6.3

Signals

6.6.3.1

Signals to/from mode group

The mode group signals from the PLC to the NCK and from the NCK to the PLC are included
in data block 11.
The signals are described in:
Reference:
Function Manual, Basic Functions; NC/PLC Interface Signals (Z1),
Chapter "Mode group, Program Operation (K1)"
6.6.3.2

Signals to/from channel

The channel signals from the PLC to the NCK and from the NCK to the PLC are included in
data blocks 21, 22, ... for the first, second ... channel.
The signals are described in:
Reference:
Function Manual, Basic Functions; NC/PLC Interface Signals (Z1),
Chapter "Mode group, Program Operation (K1)"
496
Description
Start angle for thread
Dry run feedrate
Function Manual, 09/2009, 6FC5397-1BP20-0BA0
Extended Functions