Installing The Pdc On A Concrete Floor - Huawei PDU8000 User Manual

PDU8000 Modular Precision Power Distribution Cabinet
User Manual (1100 mm Deep)
----End

5.3.2 Installing the PDC on a Concrete Floor

Procedure
Step 1 Determine the PDC installation position.
Step 2 Mark the positions for installing expansion bolts.
Figure 5-4 Marking the positions for installing expansion bolts (mm)
Step 3 Use a hammer drill to drill holes to depths of 52 mm to 60 mm at the positions for installing
expansion bolts.
Step 4 Slightly tighten the expansion bolt and vertically insert it into the hole. Knock the expansion
bolt using a rubber mallet until the expansion sleeve is fully inserted into the hole.
Step 5 Partially tighten the expansion bolt.
Step 6 Remove the bolt, flat washer, and spring washer.
Issue 01 (2019-02-25) Copyright © Huawei Technologies Co., Ltd.
5 Installation Guide
39