Chapter 2 Lt260 Installation; Installation Specifications; Table 2.1 Installation Specifications - Fujitsu ETERNUS LT260 User Manual

Chapter 2
LT260 Installation
This chapter describes the installation specifications and the installation environment.
2.1

Installation Specifications

The following table shows the installation specifications of the LT260.
Table 2.1 Installation specifications
Module
Tape drive
External
dimensions
Weight (*2)
Power
Maximum power consumption
Maximum heat generation
Environmental
conditions
*1: The expansion module can be increased to one base module up to six.
*2: excluding media and drives, including redundant PSU
FUJITSU Storage ETERNUS LT260 Tape Library User's Guide -Site Planning-
Item
Max number installed
Height
Width
Depth
Voltage
Number of phases
Frequency
AC input sources
Operating
Temperature Idle
In transport
Operating/Idle
Humidity
In transport
Altitude above sea level
Dust concentration
17
Copyright 2018 FUJITSU LIMITED
Spec
Base Module
6
265 mm (6U)
480 mm
893 mm
36 kg
100 - 240 V
single
50/60 Hz
2
231W (249VA)
831.6kJ/h
10 to 35° C
10 to 45° C
-40 to 60° C (excluding media)
20 to 80% RH
10 to 80% RH (excluding media)
5000 meters (16,450 feet)
Less than 200 microgram / cubic meter
Expansion Module (*1)
34 kg
1 (standard) or
2 (redundant option)
P3AM-8782-06ENZ0