Figure 2.7 Mount Rack Rails (3) - Fujitsu ETERNUS LT260 User Manual

Chapter 2 LT260 Installation
2.2 Installation Area
■ The rack prop : with the rack made by Fujitsu for the corner hole of 9x9mm solid shape and
the installation hole

Figure 2.7 Mount rack rails (3)

Externals of rack prop
Follow the installation of the rack rail adaptor as follows. Refer to
rack prop.
Procedure
1
The rack rail adaptor is installed in the device front side of the rack rail.
2
The rack rail that installs the rack rail adaptor is fixed to the rack prop on the device front
side with two screws.
3
The rack rail adaptor is installed in the device back side of the rack rail.
4
It fixes to the rack prop on the device back side with two screws with the rack rail adaptor
installed in the rack rail.
When the rack rail adaptor is previously installed in the prop of the rack, the rack rail is not installed.
FUJITSU Storage ETERNUS LT260 Tape Library User's Guide -Site Planning-
24
Copyright 2018 FUJITSU LIMITED
Figure 2.6 for the installation method to the
End of procedure
P3AM-8782-06ENZ0