Supported Library Configurations - Fujitsu ETERNUS LT260 User Manual

Chapter 2 LT260 Installation
2.2 Installation Area
2.2.4

Supported Library Configurations

The following configurations are supported for module libraries:
• The library will generally display logical element numbering of modules, storage slots and tape drives
starting with number one from the bottom up.
• When the amount and the position where the component is installed are changed, the re-setting of the
backup software is needed.
• You may install the tape drive where of each module, and when the tape drive is installed in the
expansion module, it is necessary to install drive power board OP (Support it up to three drives a piece) in
the expansion module.
■
1Module Library (Base Library)
Logical element numbering
of modules
FUJITSU Storage ETERNUS LT260 Tape Library User's Guide -Site Planning-
Example of the logical
element numbering of
Tape Drives
25
Copyright 2018 FUJITSU LIMITED
Installing example to
19-inch rack (42U)
P3AM-8782-06ENZ0