Connection To Multiple Servers; Figure 3.5 Fc Switch Connection, A Multiple Server Connection, A Shared Library - Fujitsu ETERNUS LT260 User Manual

Chapter 3 Connections
3.3 Connection to a Server via a FC Switch
3.3.2

Connection to Multiple Servers

■ Tape library shared but not drives
The following figure shows an example of zoning when the LT260 is shared by two servers. In this case, all the
servers use the same backup software, and the LT260 shared by the function of the backup software.
However, the drives are not shared but individually belong to each server. Only one server controls the LT260
controller.
Figure 3.5 FC switch connection, a multiple server connection, a shared library, and tape drives that are not
shared
Server A
Backup software
FC switch
FUJITSU Storage ETERNUS LT260 Tape Library User's Guide -Site Planning-
Server B
0 2
1 3 5
Controller
LT260
FC cable
Zoning for Fibre Channel for server A
Zoning for Fibre Channel for server B
Copyright 2018 FUJITSU LIMITED
Backup software
7
39
P3AM-8782-06ENZ0