How To Import A Certificate And A Key - Huawei NetCol8000-E220 User Manual

NetCol8000-E220 Modular Indirect Evaporative
Cooling System
User Manual
Step 9 Tap Maint > USB Operations > Remove USB to remove the USB flash drive.
----End

7.1.19 How to Import a Certificate and a Key

Prerequisites
You have obtained CA certificate file, local certificate file, and key file into a
USB disk that is connected to the USB port and has been recognized.
You are advised to use the FAT32 USB flash drive with a capacity no greater than
64 GB. Format the non-FAT32 USB flash drives into FAT32 ones before using them.
● Ensure that the key file has been encrypted using AES128.
● Before using a USB flash drive, ensure that its data has been scanned by
antivirus software and is secure.
Procedure
Step 1 On the home page, choose Maint > USB Operations > Import Certificate, as
shown in
Figure 7-18 Importing a certificate
Step 2 Select Client certificate or Server certificate based on the type of the certificate
in use.
Step 3 Tap Browse... next to Upload CA certificate file.
Step 4 Select the CA certificate file to be imported.
Step 5 Upload the local certificate file and the key file in turn in the same way.
Step 6 Enter Key password and Confirm key password.
Issue 06 (2020-08-19)
NO TE
If the file fails to be imported, a failure message will be displayed.
NO TICE
Figure 7-18.
Copyright © Huawei Technologies Co., Ltd.
7 FAQ
237