Optional) Setting Wifi Parameters - Huawei NetCol8000-E220 User Manual

NetCol8000-E220 Modular Indirect Evaporative
Cooling System
User Manual
Before using a USB flash drive, ensure that its data has been scanned by antivirus
software and is secure.
Figure 4-18 Exporting the MIB file successfully

4.4.3 (Optional) Setting WIFI Parameters

Prerequisites
After connecting the WIFI module of the USB interface to the USB port of the
smart cooling product display, WIFI Settings is enable to be set.
Procedure
Step 1 On the home screen, choose Settings > Comm Settings > WIFI Settings.
Step 2 Set the parameters by referring to
Table 4-7 WiFi settings
Parameter
WiFi SSID
WiFi Password
Enable WiFi
Step 3 Tap Submit.
----End
Issue 06 (2020-08-19)
NO TICE
Setting Method
Set WiFi SSID based on the actual configuration; WiFi SSID
is the name used for the WiFi hotspot over which a mobile
phone can connect to the smart cooling product.
Enter the WiFi password when you use a mobile phone to
connect to the WiFi. When you enable the WiFi function for
the first time, you need to set a password (the WiFi has no
default password).
Enable the WiFi function. The default status is Disable.
Copyright © Huawei Technologies Co., Ltd.
4 Power-on and Commissioning
Table 4-7.
96