FusionCol8000-E240 Modular Indirect Evaporative
Cooling System
User Manual
Figure 9-17 Confirming the file
Step 7 Choose Confirm and tap Next.
Step 8 After the import is complete, tap Finish.
Step 9 On the home screen, choose Maint > USB Operations > Remove USB to remove
the USB flash drive in safe mode.
----End
9.1.19 How Do I Import a Certificate and Key?
Prerequisites
You have obtained the CA certificate file, local certificate file, and key file, and
copied the data to a USB flash drive. Ensure that the USB flash drive is inserted
into the USB port on the controller and is successfully identified.
You are advised to use the FAT32 USB flash drive with a capacity less than or
equal to 64 GB. For a non-FAT32 USB flash drive, format it to the FAT32 format
using a computer.
● Ensure that the key file has been encrypted using AES128.
● Before using a USB flash drive, ensure that its data has been scanned by
antivirus software and is secure.
Procedure
Step 1 On the home screen, choose Maint > USB Operations > Import Certificate.
Issue 01 (2021-01-30)
NO TE
If the file fails to be imported, a failure message will be displayed.
NO TICE
Copyright © Huawei Technologies Co., Ltd.
9 FAQ
196