Replacing A Float - Huawei FusionCol8000-E240 User Manual

FusionCol8000-E240 Modular Indirect Evaporative
Cooling System
User Manual
Figure 8-31 Installing the fan drive
Step 7 Install the adjustable side panels.
Step 8 Power on the smart cooling product, and choose Maint > Wizard Startup on the
home screen. Start the fan and check that the fan works properly and the smart
cooling product generates no alarms. Check that the smart cooling product works
properly before you exit.
----End

8.4.17 Replacing a Float

Prerequisites
●
●
●
Context
Floats need to be maintained from the water tank.
Procedure
Step 1 On the controller home screen, tap Shutdown and turn off the device switch in
the PDF.
Exercise caution because the device is still energized after it is shut down on the
controller home screen.
Step 2 Remove the adjustable side panel.
Step 3 Open the water tank cover.
Step 4 Cut off the cable ties on the float cable and remove the interconnection terminal.
Step 5 Loosen the float nut using a wrench and remove the float from the water tank.
Issue 01 (2021-01-30)
A float needs to be replaced.
A spare float of the same model is available and functional.
Tool: solid wrench
NO TICE
Copyright © Huawei Technologies Co., Ltd.
8 System Maintenance
174