FusionCol8000-E240 Modular Indirect Evaporative
Cooling System
User Manual
8.4.11 Replacing an Air Supply NTC Temperature Sensor
Prerequisites
●
●
●
Procedure
Step 1 On the controller home screen, tap Shutdown and turn off the device switch in
the PDF.
Exercise caution because the device is still energized after it is shut down on the
controller home screen.
Step 2 Remove the sealing plates.
Step 3 Cut off the cable ties, remove the screws from the NTC temperature sensor
fastener, and take out the fastener.
Figure 8-16 Replacing an NTC temperature sensor
Step 4 Remove the screws that secure the NTC temperature sensor.
Step 5 Remove the interconnection terminal from the cable of the NTC temperature
sensor.
Step 6 Install the new NTC temperature sensor, reconnect the cables, and secure the NTC
temperature sensor in the original position.
Issue 01 (2021-01-30)
An NTC temperature sensor needs to be replaced.
A spare NTC temperature sensor of the same model is available and
functional.
Tool: Phillips screwdriver
NO TICE
Copyright © Huawei Technologies Co., Ltd.
8 System Maintenance
154