Panasonic KX-TDA30 Features Manual page 232

1.24 Portable Station (PS) Features
– Whisper OHCA (→ 1.7.4.4 Whisper OHCA)
– CCBS (→ 1.20.1.10 Completion of Calls to Busy Subscriber (CCBS))
• Most of the extension data (e.g., extension number, extension name) of the wired telephone is used for
its PS as well. However, the PS has its own extension data for the following:
– Ring Tone Pattern Table Selection (→ 1.1.3.2 Ring Tone Pattern Selection)
– Preferred Line Assignment—Incoming (→ 1.4.1.2 Line Preference—Incoming)
– Preferred Line Assignment—Outgoing (→ 1.5.5.2 Line Preference—Outgoing)
– Hot Line Setting (→ 1.6.1.7 Hot Line)
– Transfer Recall Destination for Call Transfer and Call Park
– Display Language (→ 1.19.4 Display Information)
– ISDN Bearer Mode (→ 1.20.1.1 Integrated Services Digital Network (ISDN)—SUMMARY)
– Flexible Button Assignment (→ 1.19.2 Flexible Buttons)
Note
To change the setting of the extension data above, the setting for the wired telephone or the PS
must be changed individually. When changing the PS setting, use the PS's original extension
number (not the main telephone's extension number), if required.
• When the Wireless XDP Parallel Mode has been set, the following extension data for the wired
telephone is copied to the PBX extension data for the PS and the extension data remains there even
when the Wireless XDP Parallel Mode is cancelled.
– Call Waiting Setting (→ 1.1.3.3 Call Waiting)
– FWD/DND Setting (→ 1.3.1 Call Forwarding (FWD)/Do Not Disturb (DND))
– Call Pickup Deny Setting (→ 1.4.1.3 Call Pickup)
– Executive Busy Override Deny Setting
– Itemised Billing Code for ARS (→ 1.9.1 Automatic Route Selection (ARS))
– Transfer Recall Destination for Call Transfer and Call Park
– CLIP/COLP Number (→ CLIP/COLP Number [606])
– CLIP/COLP Number Selection
– CLIR Setting
– COLR Setting
– Extension Personal Identification Number (PIN) (→ Extension Personal Identification Number
(PIN) [005]) (→ 1.27.1 Extension Personal Identification Number (PIN))
– COS Programming (→ Class of Service [602]) (→ 2.2.1 Class of Service (COS))
– User Group (→ User Group [603]) (→ 2.2.2 Group)
• If the Extension Feature Clear is performed, the corresponding extension data for both the wired
telephone and the PS will be cleared. (→ 1.27.2 Extension Feature Clear)
• When a call arrives, both the wired telephone and the PS ring. However, in the following cases only the
person who made the setting will receive ringing:
– Automatic Callback Busy
– Transfer Recall, Hold Recall (→ 1.12.1 Call Hold), and Call Park Recall
Feature Guide References
1.7.1 Automatic Callback Busy (Camp-on)
1.7.2 Executive Busy Override
1.10.9 Parallelled Telephone
1.11.1 Call Transfer
232 Feature Guide