Call Transfer (Ct)-By Qsig - Panasonic KX-TDA30 Features Manual
Hybrid ip-pbx
Hide thumbs
Also See for KX-TDA30:
- Features manual (472 pages) ,
- Installation manual (428 pages) ,
- User manual (258 pages)
Table of Contents
Advertisement
1.29.3.4 Call Transfer (CT)—by QSIG
Description
The PBX transfers the call to a destination extension in another PBX in QSIG network.
This feature complies with the following European Telecommunication Standard (ETS) specifications: ETS
300 261 Call transfer supplementary service.
If the same trunk group is used for the incoming call and the transferred call, the following situation will be
possible.
[Example]
PBX-1
Extn. 1000 Extn. 1001
Dials "2000".
PBX-1
3
Extn. 1000 Extn. 1001
Conditions
•
This feature can be enabled or disabled on an ISDN (QSIG) port basis.
•
Call Transfer with Announcement and Call Transfer without Announcement is possible
(→ 1.11.1 Call Transfer).
QSIG
PBX-2
1
Call to 2000
2
Transferred
to 1001
Extn. 2000
QSIG
Extn. 2000
Extension 1000 of PBX-1 dials extension
1
number "2000", and the call is sent to
extension "2000" of PBX-2 through QSIG
network.
The call is transferred from extension
2
2000 to extension "1001" of PBX-1.
The call between PBX-1 and PBX-2 is
3
released, and the call is connected
directly to the transfer destination of
extension 2000.
PBX-2
1.29 Networking Features
Feature Guide
285
Advertisement
Table of Contents
