Dial Type Selection - Panasonic KX-TDA30 Features Manual

1.5.4.4

Dial Type Selection

Description
The dialling mode (rotary or tone) can be selected for each analogue trunk through system programming
(→ LCOT Dialling Mode [410]) regardless of the originating extension (under contract with the telephone
company).
There are the following modes:
Mode
DTMF (Dual Tone Multi-
Frequency)
Pulse Dial (Rotary)
Conditions
• Pulse to Tone Conversion
It is possible for an extension user to temporarily switch from Pulse mode to DTMF mode so that the
user can access special services such as computer-accessed long distance calling or voice mail
services. To switch to DTMF mode, wait for a preprogrammed time period (Default: five seconds) after
the trunk is connected, or press
cannot be changed to Pulse mode.
• It is possible to select the pulse rate for a trunk port that has been set to Pulse mode (→ LCOT Pulse
Rate [411]). There are two pulse rates: Low (10 pps) and High (20 pps).
• It is possible to assign the minimum duration of the DTMF signal sent to a trunk port that has been set
to DTMF mode (→ LCOT DTMF Minimum Duration [412]).
The dialling signal from an extension is converted to tone dialling.
DTMF signals are transmitted to the trunk.
The dialling signal from an extension is converted to rotary dialling.
Rotary pulses are transmitted to the trunk.
. This feature works only on trunks set to Pulse mode. DTMF mode
1.5 Making Call Features
Description
Feature Guide 79