Panasonic KX-TDA30 Features Manual page 261

Explanation:
Location 01:
Location 02:
Location 03:
2.2
To Receive a TIE Line Call
a)
Extension Number Method (Access without PBX Code)
[Example]
PBX-4
Extn. 1011
PBX-1
Dials "3011".
Note
The hunt sequence by dialling [7+PBX Code 952+XXXX]:
The 1st route — trunk group (TRG) 1
Sending no. to PBX-2: 952–XXXX
The hunt sequence by dialling [7+PBX Code 953+XXXX]:
The 1st route — trunk group (TRG) 1
Sending no. to PBX-2: 953–XXXX
The 2nd route — trunk group (TRG) 2
Sending no. to PBX-4:
The hunt sequence by dialling [7+PBX Code 954+XXXX]:
The 1st route — trunk group (TRG) 2
Sending no. to PBX-4:
TIE Line Network
PBX-3
1 3011
PBX-2
When a TIE line call is sent to a PBX from another PBX, first the PBX modifies the number
sent to the PBX according to the assignment for each trunk port of the PBX: the removed
number of digits from and/or added number to the number sent to the PBX is determined
by the assignment. Then the PBX starts to check the number whether the number is an
extension number of the PBX.
953#–XXXX
954#–XXXX
A TIE line call is sent to PBX-2 from PBX-1.
1
If the number sent from PBX-1 is an
extension number of PBX-2 (e.g., 2011), the
call will be received at extension "2011". If
3 not, PBX-2 checks the number in the TIE
Line Routing and Modified Table of PBX-2.
Extn. 3011
If the match is found in the table, the call will
2
be modified according to the table and send
to the corresponding PBX (PBX-3).
2 3011
The number sent from PBX-2 "3011" is an
3
extension number of PBX-3. The call is
received at extension "3011".
Extn. 2011
1.29 Networking Features
Feature Guide 261