Ring Tone Pattern Selection - Panasonic KX-TDA30 Features Manual

1.1.3.2

Ring Tone Pattern Selection

Description
A ring tone pattern can be selected for each incoming call type. Several of these tables of patterns can be
stored, and one assigned for each extension.
[Ring Tone Patterns]
1 280 ms*
Single
Double
Triple
S-Double
*: The duration of a ring tone may vary by country.
[Programming Example of Ring Tone Pattern Table]
There are a specified number of programmable tables, each of which allows the assignment of ring tone
patterns for the following incoming call types:
For trunk calls (including trunk call hold recalls) and doorphone calls, a different ring tone pattern can be
selected for each trunk group and doorphone port.
Intercom
Table
Call/Hold
No.
Recall
1 Double
2 Single
: :
Each extension can select one of the tables.
Conditions
• "PT Ring off Setting" can be enabled or disabled through system programming. If disabled, PT
users cannot turn incoming call ringing off for their extension.
Trunk Call/Hold
Recall
TRG1 TRG2 ... Port 1
Single Single
Double Double
: : :
Doorphone Call
Reminder
Port 2 ...
: : :
1.1 Incoming Call Features
Timed
Call Back
: :
External
LCS
Sensor
: :
Feature Guide 39