Last Number Redial - Panasonic KX-TDA30 Features Manual
Hybrid ip-pbx
Hide thumbs
Also See for KX-TDA30:
- Features manual (472 pages) ,
- Installation manual (428 pages) ,
- User manual (258 pages)
Table of Contents
Advertisement
1.6.1.4
Last Number Redial
Description
Every extension automatically saves recently dialled external telephone numbers to allow the same number
to be dialled again easily.
Automatic Redial:
If Last Number Redial is performed in hands-free mode and the called party is busy, redialling will be
automatically retried a preprogrammed number of times (→ Automatic Redial Repeat Times [205]) at
preprogrammed intervals (→ Automatic Redial Interval [206]). The Redial Call No-answer Ring Duration
time is programmable.
This feature is available only on certain PT models which have the SP-PHONE button.
Outgoing Call Log:
Information on outgoing trunk calls is automatically logged at each extension. Users of display PTs can view
details of a preset number of recently dialled telephone numbers, and easily call the same outside party
again.
Conditions
•
If a new number is dialled when the Outgoing Call Log is full and/or Automatic Redial contains a
number, the data of the oldest stored call will be deleted, and the new number will be stored.
•
If any dialling operation is done or an incoming call is answered during Automatic Redial, Automatic
Redial is cancelled.
•
Automatic Redial is not available for some countries/areas when using an analogue trunk.
•
Interrupt Redial
When the called party or the seized trunk is busy, it is possible to press the REDIAL button continuously
until the called party or the trunk becomes idle. There is no need to go off-hook, before pressing the
REDIAL button.
•
Outgoing Call Log Display by REDIAL Button
Pressing the REDIAL button on a display PT while on-hook can display the Outgoing Call Log. System
programming is required for this operation.
•
If the Outside Call Log is used to redial an outside party, or a number already stored in the Outgoing
Call Log is manually redialled again, the number will be stored in the call log multiple times. However,
calls made using the REDIAL button are not stored in the Outgoing Call Log again.
•
It is possible to change the number of records that can be stored at each extension through system
programming.
User Manual References
1.2.3 Redial
1.11.1 Using the Call Log
1.6 Memory Dialling Features
Feature Guide
95
Advertisement
Table of Contents
