Group - Panasonic KX-TDA30 Features Manual

2.2 System Configuration—Software
2.2.2

Group

Description
This PBX supports various types of groups.
1.
Trunk Group
Trunks can be grouped into a specified number of trunk groups (e.g., for each carrier, trunk type, etc.)
(→ LCOT/BRI Trunk Group Number [402]). Several settings can be assigned on a trunk group basis.
All trunks belonging to a trunk group follow the assignment determined for that trunk group.
One trunk can belong to only one trunk group on a port or channel basis.
Port basis: LCOT/DID/E & M/ISDN-BRI/ISDN-PRI23/ISDN-PRI30
Channel basis: E1/T1
2.
User Group
The PBX supports user groups (→ User Group [603]), each of which is used to compose the following
groups:
a)
Tenant (→ 2.2.3 Tenant Service)
b)
Call Pickup Group (See below.)
c)
Paging Group (See below.)
Every extension must belong to one user group, but cannot belong to more than one user group.
Assignable Extensions: PT/SLT/PS/ISDN Extension/T1-OPX
[Example]
User Group 1
Extn. 100 Extn. 101
2.1
Call Pickup Group (→ User Groups of a Pickup Group [650])
Using the Group Call Pickup feature, extensions can answer any calls within a specified group. One
user group can belong to several call pickup groups.
(→ 1.4.1.3 Call Pickup)
[Example]
Call Pickup Group 1
User Group 1
Extn. 100 Extn. 101
302 Feature Guide
User Group 2 User Group 3
Extn. 102 Extn. 103 Extn. 104 Extn. 105
Call Pickup Group 2
User Group 2
Extn. 102 Extn. 103
User Group 4
Extn. 106 Extn. 107
Call Pickup Group 3
User Group 3 User Group 4
Extn. 104 Extn. 105 Extn. 106 Extn. 107