Mains Connection Pc1002; Fig. 5: Pc1002-A3 Mains Connector 'X100' With Pre-Assembled Wiring; Table 2: Pc1002-A3 Mains Connector - 'X100 - Siemens Cerberus PACE Compact Installation, Mounting

4 Mounting/Installation
Wire the mains supply line

4.5.2 Mains connection PC1002

4.5.2.1 Mains connector 'X100' on PC1002
Pin Designator Connection
1 L1
2 L1
3 N
4 N
5 PE
6 PE
7 PE
8 PE
9 PE
10 PE
32 | 122
The 230 V mains connection of the 'Voice alarm panel Compact 1000' PC1002-A3
is divided into 2 connectors: the mains connector 'X100' and the mains connector
'X102'. The 'X100' is used to connect the mains connection and connect the mains
filter. It is in the upper left of the cabinet. The 'X102' is connected to the output of
the mains filter and is used to supply the internal components with 230 V. The
power supply, the mains filter, 2 amplifiers and the PE to the cabinet are already
pre-assembled.

Fig. 5: PC1002-A3 mains connector 'X100' with pre-assembled wiring

Connection to the mains input filter; pre-assembled
X100 Terminal block for the mains supply connection
Mains connector - 'X100'
Outer conductor
Outer conductor
Neutral conductor
Neutral conductor
Protective conductor
Protective conductor
Protective conductor
Protective conductor
Protective conductor
Protective conductor

Table 2: PC1002-A3 mains connector - 'X100'

Follow the steps below to wire the mains supply line:
1. Connect the protective conductor with the yellow/green wire to the free 'PE'
ground terminal.
2. Connect the blue neutral conductor to the terminal 'N'.
3. Connect the brown outer conductor to the terminal 'L1'.
Color Description
Brown Mains connection
Brown Pre-assembled; mains filter
Blue Mains connection
Blue Pre-assembled; mains filter
Yellow/green -
Yellow/green Pre-assembled; cabinet
Yellow/green -
Yellow/green -
Yellow/green Mains connection
Yellow/green Pre-assembled; mains filter
A6V11899867_en--_a