Centralised Control Group No. Setting - Panasonic Urban Multi MX1R Series Service Manual

Test Operation
1.19

Centralised Control Group No. Setting

„ If carrying out centralised control by central remote controller or unified ON/OFF controller, group No.
CZ-01RT Type
„ Group No. setting by remote controller for centralised control
1. When in the normal mode, push the
2. Set mode No. "00" with the
3. Push the timer
4. Set the group No. for each group with the
5. Push the timer
6. Push the
„ Even if not using a remote controller, connect the remote controller when setting the group No., set the
„ Set the group No. after turning on the power supply for the central remote controller, unified ON/OFF
110
must be set for each group individually by remote controller.
the "field setting mode."
button to inspect the group No. display.
1-01, ...,1-15, 2-00,...4-15. However, the unified ON/OFF controller displays only the group No. within
the range selected by the switch for setting each address.)
button to define the selected group No.
button to return to the normal mode.
group No. for centralised control, and disconnect after making the setting.
controller, and indoor unit.
button for 4 seconds or more, and operation then enters
button. ∗
button (The group No. increases in the manner of 1-00,
Test Operation Urban Multi "MX1, ME1 Series" Using R-22
PACD011001C2