Central Remote Controller (Cz-01Esm11P) - Panasonic Urban Multi MX1R Series Service Manual

Test Operation
1.22

Central Remote Controller (CZ-01ESM11P)

Enables central control with the performance of a series of remote controllers by connecting with up to 64
groups of indoor units (128 units).
‹ You can connect with up to 64 groups of indoor units (128 units) and monitor or perform operations
‹ Designed to save labor of operation, and is able to execute zone control for up to 64 zones.
‹ Malfunction contents are given in code, so maintenance or inspection can be carried out quickly.
‹ Lets you connect 1 schedule timer and 4 unified ON/OFF controllers per central remote controller, and
‹ Wiring can be extended up to 1 km. Besides crossover wiring, bus or star type can also be used.
1.22.1 System Configuration
With a central remote controller, you can simultaneously turn up to 64 groups of indoor units on or off (up to
128 units). You can also turn on or off, set operation and control modes such as operation controlled by
timer, make operation by remote controller possible or impossible, and control or display operation
conditions such as preset temperature by zone. (Case where operation controlled by timer is used in
combination with schedule timer.) By group, you can display operation conditions such as operation mode
and preset temperature. Connection by forced OFF input (non-voltage a contact) with outside key system
or host computer monitor panel is impossible.
This optional accessory cannot be used in combination with optional accessory BMS interface adaptor for
individual and unified control (KRP4A51, 52) or unified group (KRP2A51, 52).
116
such as turning on/off individually or simultaneously, setting temperature, etc., by the zone.
enables you to freely expand the central control system in accordance with scale and use.
Test Operation Urban Multi "MX1, ME1 Series" Using R-22
PACD011001C2