Power Mode Switch - Hitachi ZW 120-6 Operator's Manual

Power Mode Switch

Operating power mode switch (1) turns the power mode
function ON and OFF.
Power Mode Material
OFF Mode
(Loading work with
more emphashis on
fuel consumption)
ON Mode
(Heavy digging work
with more emphasis
on work effectiveness)
Each time the upper side of the switch ( mark) is pressed,
the power mode changes ON/OFF alternately.
When the power mode is activated, power mode indicator
(2) will light on the monitor panel.
f
NOTE: When turning the key switch ON, the power mode
always starts from OFF state. Before operating the machine
at power mode, operate the power mode switch and ensure
power mode indicator (2) is ON.
OPERATOR'S STATION
 Crushed Rocks in Smaller
Diameter
 Gravel
 Stone
 Sand
 Waste Plastic
 Chips
 Crushed Rocks in Larger
Diameter
 Crushed Concrete
 Stone in higher specific gravity
 Cohesive soil
1-60
1
MNDB-01-005
1
MNEC-01-016
2
MPTC-01-019