Hitachi ZW 120-6 Operator's Manual page 160

5. Check that control lever lock switch (7) is in the LOCK ( )
position.
6. Adjust the position of outside rear view mirror (8) and
room rear view mirror (9) so that the best rear visibility
can be obtained.
7. While seated on the operator's seat with your back in
contact with the backrest, adjust each function of the
seat so that the brake pedal can be fully stepped on.
8. Fasten seat belt (10).
OPERATING ENGINE
3-4
9
8
7
MNDB-01-005
M4GB-01-126
10
MNEC-01-045