Inspection/Maintenance Access Side Cover - Hitachi ZW 120-6 Operator's Manual

Inspection/Maintenance Access Side Cover

d
CAUTION:
 Always close side cover (1) during driving and
operation.
 Do not keep side cover (1) open on a slope or when
a strong wind is blowing. Failure to do so may be
dangerous because side cover (1) may unexpectedly
close.
 Take care not to pinch your fingers when opening/
closing the side covers (1).
 When side cover (1) is opened, the cover may move
suddenly. Be careful not to come in contact with the
cover.
 Before inspecting around the engine, be sure to
secure side cover (1) with holding rod (4).
 In case the machine is equipped with the fenders (2)
on side covers (1), never ride on the fenders (2).
When opening side cover (1), pull latch (3).
f
NOTE: When required to inspect the machine for a long time
with side cover (1) kept open, lock side cover (1) using holding
rod (4) provided inside side cover (1).
Side cover (1) has a holding groove. Engage the holding rod
(4) in the holding groove beforehand.
MAINTENANCE
7-10
1 2
3
MNSC-01-021
4
MNSC-01-022