Inspection/Maintenance Side Access Cover - Hitachi ZW 370-6 Operator's Manual

Inspection/Maintenance Side Access Cover

d
CAUTION:
 Always close side covers (1) when moving and/or
operating machine.
 Do not keep the side cover open on a slope or
when a strong wind is blowing. Failure to do so
may be dangerous because the side cover may
unexpectedly move or close.
 Take care not to pinch fingers when opening/
closing side cover (1).
 As the lower part of side cover flips up by itself,
care should be taken not to be hit with the cover
when opening it.
 To lock lower part of side cover (3) holding up lower
part (3) manually. Slide and set lock lever (4) up in
position.
To release the lock, pull plate (4) while holding
lower part (3) and release the end of lock lever (4)
from the lock position. Slowly lower cover (3) while
supporting it manually.
 Never attempt to stand on fender (2) if side cover
(1) is provided with fender (2).
OPERATOR'S STATION
1
4
1-149
1
2
3
95Z7B-1-140-1
95Z7B-1-140-2