Hitachi ZW 370-6 Operator's Manual page 122

4. Rotate selector knob (2) to highlight Aftertreatment
Device Regeneration Inhibited (6).
5. Press selector knob (2) to display Aftertreatment Device
Regeneration Inhibited screen (7).
6. Rotate selector knob (2) to highlight
selector knob (2) to display Aftertreatment Device
Regeneration Inhibited screen (9).
7. Rotate selector knob (2) to highlight ON (10).
Confirmation screen is added.
Press selector knob (2) to turn Aftertreatment Device
Regeneration Inhibited ON. Press selector knob (2) again
to turn Aftertreatment Device Regeneration Inhibited
OFF.
When ON is selected, regeneration inhibited icon (11)
will be displayed on the monitor.
f
NOTE: When the function is ON, the mark "" is displayed in
green. When the function is OFF, the mark "" is displayed in
gray.
IMPORTANT: This procedure will inhibit both automatic
and manual regeneration.
When the machine is operated with the aftertreatment
device regeneration inhibited, the aftertreatment
device becomes clogged more quickly than expected.
When the aftertreatment device regeneration
request is displayed, move the machine to a safe
place. Perform the manual regeneration following
the specified procedure. Failure to do so may damage
the aftertreatment device. Refer to page 5-11 for the
manual regeneration.
OPERATOR'S STATION
(8), and press
1-58
2
7
9
11
MNEC-01-006
6
MNHG-01-170EN
8
MNHG-01-171EN
10
MNHG-01-172EN