Table of Contents
Advertisement
Driving the Machine
Correct operation will result in extending the service life of
each part and component as well as saving fuel and oil.
Always be sure to safely and efficiently operate the machine
while paying attention to the following points.
IMPORTANT: The engine must be started and ready for
driving correctly by referring to the previous section
"OPERATING THE ENGINE".
Precautions for starting to move
1. Perform a thorough walk-around inspection.
Conduct correct start-up procedure.
2. After raising the lift arm, set the lift arms and bucket in
the operating position.
3. Before driving on roads, set the machine to the driving
position as illustrated to the right.
4. Be sure to press lock ( ) side of control lever lock switch
(1) so that the linkage will not move even if the control
levers are accidentally moved.
MOVING THE MACHINE
A
4-1
Position (Bucket Bottom)
A: 350 mm (14 in)
95Z7B-4-1
1
MNEC-07-001
Advertisement
Table of Contents
Troubleshooting
