Preparations For Inspection And Maintenance - Hitachi ZW 370-6 Operator's Manual

Preparations for Inspection and Maintenance

d
WARNING: If ride control switch (3) (option) is in the
AUTO position, the lift arm may unexpectedly rise.
To avoid an accident due to unexpected movement
of the lift arm and bucket, always turn ride control
switch (3) OFF before beginning the inspection and/or
maintenance of the machine.
d
CAUTION: If the machine is unexpectedly moved,
a serious accident may result. Be sure to apply the
parking brake when parking the machine.
Unless specified otherwise, park the machine by following the
procedures below before beginning the inspection and/or
maintenance work.
1. Park the machine on a solid level surface.
2. Lower the working tools such as the bucket level to the
ground.
3. Turn ride control switch (3) OFF.
f
NOTE: If your machine is equipped with the optional
joystick steering, set forward/reverse switch (a) on the
joystick steering to the neutral position.
Push the lock button and fully raise armrest (b) until it locks
in the raised position.
MAINTENANCE
8
"Raised" position
b
7-6
1 2 3
PUSH
MNEC-07-001
a
95Z7-1-85-1