Hitachi ZW 120-6 Operator's Manual page 217

Lifting
1. Straighten the machine and position the front
attachment horizontally as illustrated to the right.
2. Move the control lever lock switch in the LOCK ( )
position.
3. Rigidly secure the front and rear frames using the
articulation lock bar.
4. Stop the engine. Remove the key from the key switch.
5. Please close all the doors and covers, and lock them.
6. Please use wire rope and a support bar that is long
enough so they do not come in contact with the
machine body when the machine is lifted.
(Refer to the section "Length and Load of Wire Rope/
Support bar" for more detailed information.)
Wrap a protective cover around the wire ropes as
required to prevent the machine from being damaged.
Be sure to use the specified lifting tools.
7. Set the crane in the appropriate position.
8. Attach the wire ropes to the lifting tool at the front and
rear frame.
TRANSPORTING
6-11
MNEC-05-001