Table of Contents
Advertisement
Auto Shut-Down (Optional)
d
WARNING: This function automatically stops the
engine. Pay extra attention to the work and work
environment when using this function.
The auto shut-down function can be set in this screen. Set
the auto shut-down time and enable (ON) the function
beforehand. The engine automatically stops after the preset
time when machine is parking under the following conditions:
The engine is running.
The parking brake is applied.
The forward/reverse lever (switch) is in neutral (N).
The accelerator pedal is not depressed.
The brake pedal is not depressed.
The control lever is not operated.
The steering wheel is not operated.
Coolant, hydraulic oil and transmission temperature are
not high.
The aftertreatment device manual regeneration is not
operating.
30 seconds before the engine stop, the monitor displays a
message that the engine will be stopped and indicator (7)
starts flashing. The buzzer also sounds. The buzzer sounds
once at 30 seconds before, intermittently sounds from 15
seconds, and then stops after 15 seconds. When the machine
is in the operating state before stopping the engine, the auto
shut-down is disabled and the engine will not stop.
IMPORTANT:
Do not leave the machine after auto shut-down.
Failure to do so may discharge the batteries.
To restart the engine, turn the key switch OFF, and
then perform normal starting procedure.
Auto Shut-Down: ON/OFF
1. Press selector knob (2) while displaying Basic Screen (1)
to display Main Menu screen (3).
2. Rotate selector knob (2) to highlight Setting Menu (4).
3. Press selector knob (2) to display Setting Menu screen
(5).
4. Rotate selector knob (2) to highlight Auto Shut-Down (6).
OPERATOR'S STATION
1-53
7
2
3
5
1
MNFB-01-100EN
MNEC-01-006
4
MNEK-01-140EN
6
MNEK-01-150EN
Advertisement
Table of Contents
