Table of Contents
Advertisement
Clutch Cut Position Switch
To perform digging (scooping) or loading operation, clutch cut
position switch (1) can be set to any position
Turn the clutch cut position switch ON to let the machine
power concentrate on digging operation or to increase the lift
arm raising speed.
[
] side (Clutch Cut)
By depressing left or right brake pedal (3), the clutch is
disengaged and brake is applied without transmitting the
drive power to the tires.
: Clutch cut ON when lightly depressing the brake
pedal (3).
(Suited to loading work on a level surface or on a
gentle slope.)
: Clutch cut ON when deeply depressing the
brake pedal (3).
(Suited to operate on a steep slope)
OFF [ ] (Clutch Engaged)
By depressing left or right brake pedal (3), brake is applied
while driving power is transmitted to the tires.
f
NOTE:
When starting to ascend a slope, turn clutch cut position
switch (1) OFF
(clutch engaged), depress the left
brake pedal (3). Gradually release the left brake pedal
while depressing the accelerator pedal (4) to easily start
ascending a slope.
Effective use of the clutch cut position switch leads to
reduced fuel consumption and overheating of axle oil.
OPERATING MACHINE
.
5-5
1
3
1
MNEC-07-001
1
ON
OFF
ON
MNEC-01-025
2
MNEC-01-036
4
Advertisement
Table of Contents
