Table of Contents
Advertisement
High-Low Beam Switch
Shifts the direction of the headlight beam high and low.
d
CAUTION: Travel the machine with the headlight in
the low beam position when other vehicles are present
in the vicinity.
By bringing down the signal lever (7) with the headlight
ON, the headlight beam turns upward, and the high beam
indicator (8) comes ON. By bringing up the signal lever (7), the
headlight beam turns downward, and the high beam indicator
(8) goes OFF.
Key Switch
d
WARNING: Before starting the engine, return the
forward/reverse lever and forward/reverse switch to
neutral (N), apply the parking brake, lock the neutral
lever lock, and lock the control lever. Refer to the
descriptions in the OPERATING ENGINE section for the
detail information.
d
WARNING: Never turn key switch (9) OFF while
traveling the machine. Failure to do so will result in
steering wheel and brake pedal to be inoperable.
1- OFF (Engine Off )
2- ACC (Radio)
3- ON (Power ON)
4- START (Engine Start)
OPERATOR'S STATION
1-88
8
2
3
1
9
7
9
MNEC-01-038
MNEC-01-073
4
MNDB-01-053
Advertisement
Table of Contents
