Hitachi ZW 310-6 Operator's Manual page 189

4. Inclination Adjustment
The inclination of the seat surface can be changed. While
pulling up lever (4) provided in the front of the seat,
press or release the seat surface to adjust the inclination
of the seat surface from 3° to 11° in 4 steps.
A : 3 °
B : 2.5 °
5. Seat Depth Adjustment
The fore/after position of only the seat surface can be
changed. While pulling up lever (5) provided in the front
the seat, slide the seat in the front or rear direction to
adjust the seat depth up to 60 mm by 15 mm interval.
6. Armrest Adjustment
The armrest is a movable type. Keep the armrest in the
upright position unless required.
7. Armrest Angle Adjustment
The angle of the armrest can be adjusted by turning
knob (7) provided under the armrest.
A : Raise
B : Lower
OPERATOR'S STATION
1-123
5
4
M4GB-01-093
M4GB-01-094
6
7
M4GB-01-095