Auto Shut-Down: Setting Time - Hitachi ZW 310-6 Operator's Manual

5. Press selector knob (2) to display Auto Shut-Down screen
(7).
6. Rotate selector knob (2) to highlight ON (8).
7. Press selector knob (2) to set the auto shut-down
function ON and indicator (11) will be lit. Press selector
knob (2) again to set the auto shut-down function OFF
and indicator (11) goes off.
f
NOTE: When the function is ON, the mark "" is displayed in
green. When the function is OFF, the mark "" is displayed in
gray.

Auto Shut-Down: Setting Time

1. On the Auto Shut-Down screen, rotate selector knob (2)
to highlight Setting Time (9) and push selector knob (2).
2. Rotate selector knob (2) clockwise to increase acting
time at 1 minute step.
Rotate selector knob (2) counterclockwise to decrease
acting time at 1 minute step.
The idle time can be set from 1 minute up to 30 minutes.
3. Press selector knob (2) to make the change.
f
NOTE: 30 seconds before the engine stops, the monitor will
display "Engine Shut-Down Soon. " message (10).
OPERATOR'S STATION
1-54
2
7
11
10
MNEC-01-006
8
MNEK-01-151EN
9
MNEK-01-152EN
MNEK-01-153EN