Table of Contents
Advertisement
Coolant Temperature Gauge
The engine coolant temperature is indicated with a needle.
When the needle stays in the range (1) during operation, the
coolant temperature is normal.
If the engine coolant temperature becomes abnormally high,
the service indicator will flash and the alarm buzzer will sound.
Stop machine operation and run the engine at low idle to
lower the coolant temperature. After the coolant temperature
lowers, stop the engine for inspection. If the needle does not
move at all, error in the electrical system is suspected. Contact
your nearest Hitachi dealer for machine inspection.
Fuel Gauge
The remaining fuel amount is indicated by the needle.
Refuel before the needle reaches in the red range "E".
When the needle reaches in the red range (E), the fuel level
indicator lights.
f
NOTE: The fuel level indicator may light even if the indicator
needle does not reach the red range (E), depending on the tilt
angle of machine.
OPERATOR'S STATION
1-15
1
M4GB-01-028
Fuel Level Indicator
MNEC-01-002
Advertisement
Table of Contents
