Control Lever Lock Switch - Hitachi ZW 310-6 Operator's Manual

Wheel loader

Hide thumbs Also See for ZW 310-6:

Table of Contents

Control Lever Lock Switch

 Be sure to press LOCK ( ) side of control lever lock

 Before leaving the operator's seat, be sure to stop

the engine. Set control lever lock switch (1) to the

LOCK ( ) position.

 Always check to be sure that the control lever

lock switch is set in the LOCK ( ) position before

transporting the machine or leaving the machine at

the end of the shift.

Control lever lock switch (1) is provided to prevent the

machine unexpectedly being operated even if the operator

mistakenly comes in contact with the bucket and/or lift arm

control lever when getting on or off the machine. When

control lever lock (1) is placed in UNLOCK ( ) position, the

control lever becomes operable.

Control Lever Lock Switch Operation

 When leaving the operator's seat:

1. Park the machine on solid level ground. Lower the

bucket to the ground. Return all levers to hold. Stop the

2. Press LOCK ( ) side of control lever lock switch (1).

 Before starting operation:

Before starting operation, check that control lever lock

switch (1) is in the UNLOCK ( ) position.

OPERATING MACHINE