Displaying From A Windows Laptop; Displaying From A Mac Laptop; Solutions When "Not Supported" Message Appears; Solutions When Only A Partial Image Appears - Epson EV-110 User Manual

Solving Image or Sound Problems

Displaying From a Windows Laptop

If the message "No Signal" is displayed when projecting from a laptop, you
need to set up the Windows laptop to display on an external monitor.
a Hold down the Windows key and press P on your keyboard at the same
time, then click Duplicate.
b If the same image is not displayed by the laptop and projector, check
the Windows Display utility to make sure the external monitor port is
enabled and extended desktop mode is disabled.
c If necessary, check your video card settings and set the multiple display
option to Mirror or Duplicate.

Displaying From a Mac Laptop

If the message "No Signal" is displayed when projecting from a Mac laptop,
you need to set up the laptop for mirrored display. (See your laptop manual
for details.)
a Open the System Preferences utility and select Displays.
b Select the Display or Color LCD option, if necessary.
Click the Arrange or Arrangement tab.
c
d Select Mirror Displays.

Solutions When "Not Supported" Message Appears

If the message "Not supported" is displayed, try the following solutions:
• Make sure the correct input signal is selected in the projector's Signal menu.
• Make sure the computer's display resolution does not exceed the projector's
resolution and frequency limits. If necessary, select a different display
resolution for your computer.
g g Related Links
• "Input Signal Settings - Signal Menu"
• "Supported Monitor Display Resolutions"

Solutions When Only a Partial Image Appears

If only a partial computer image appears, try the following solutions:
• Make sure the Scale setting in the Signal menu is turned off.
• Change the Aspect setting in the projector's Signal menu to select a
different image aspect ratio.
• Adjust the image size using the [Zoom] buttons on the remote control, and
then try adjusting the image position on the Image Shift screen displayed.
• Check your computer display settings to disable dual display and set the
resolution within the projector's limits.
• Check the resolution assigned to your presentation files to see if they are
created for a different resolution.
• Make sure you selected the correct projection mode. You can select this
using the Projection setting in the projector's Extended menu.
• When playing a playlist, make sure you are using the appropriate Overlay
Effect settings.
Settings > Content Playback > Overlay Effect
s
g g Related Links
• "Input Signal Settings - Signal Menu"
• "Projector Setup Settings - Extended Menu"
• "Supported Monitor Display Resolutions"
• "Adding Effects to Your Projected Image"
152
p.123
p.165
p.123
p.126
p.165
p.63