Solutions When The Image Contains Static During Network Projection - Epson EV-110 User Manual

Solving Network Problems
• Connect to a wired LAN, or to a wireless LAN with the Connection Mode
setting set to Advanced.
Network > Network Configuration > Wireless LAN > Connection
s
Mode
• Change the Port setting according to your network environment.
Extended > Standby Mode > Port
s
g g Related Links
• "Network Menu - Notifications Menu"
• "Projector Setup Settings - Extended Menu"
Solutions When the Image Contains Static During
Network Projection
If the projected image contains static during network projection, try the
following solutions:
• Check for any obstacles between the access point, the computer, the mobile
device, and the projector, and change their positions to improve
communication.
• Make sure that the access point, the computer, the mobile device and the
projector are not too far apart. Move them closer together and try to
connect again.
• Check for interference from other equipment, such as a Bluetooth device or
microwave. Move the interfering device farther away or expand your
wireless bandwidth.
• Reduce the number of connected devices if the connection speed declines.
p.134
p.126
158