G G Related Links; Turning On The Projector - Epson EV-110 User Manual

Turning On the Projector

• When the Direct Power On setting is set to On in the projector's
Extended menu, the projector turns on as soon as you plug it in.
Note that the projector also turns on automatically in cases such as
a
recovery from a power outage.
s Extended > Operation > Direct Power On
• If you select a specific port as the Auto Power On setting in the
projector's Extended menu, the projector turns on as soon as it
detects a signal or cable connection from that port.
s Extended > Operation > Auto Power On
• About the LCD panel
• When a high-powered laser beams through the surface of the
projection lens even when it is not being used, it can cause a
malfunction in the LCD panel.
• If the same image is projected for an extended period, burning may
occur on the LCD panel. Use Refresh Mode in the projector's
Reset menu to reduce screen burn.

g g Related Links

• "Projector Setup Settings - Extended Menu"
• "Adjusting the Brightness" p.54
p.126
34