Controlling A Networked Projector Using A Web Browser - Epson EV-110 User Manual

Controlling a Networked Projector Using a Web Browser

Once you have connected your projector to your network, you can select
projector settings and control projection using a compatible Web browser.
This lets you access the projector remotely.
You can also edit playlists.
• Make sure the computer and projector are connected to the network.
When projecting images using a wireless LAN, connect in Advanced
connection mode.
a
• You can use the following Web browsers.
• Internet Explorer 11 or later (Windows)
• Microsoft Edge (Windows)
• Safari (Mac, iOS)
• Chrome (Android)
• While using the Web browser, do not connect using a proxy server.
You cannot select all of the projector menu settings or control all
projector functions using a Web browser.
• Under the following conditions, you can use a Web browser to select
settings and control projection even if the projector is in standby
mode (when the power is off).
• When the Standby Mode setting is set to Communication On
s Extended > Standby Mode > Standby Mode
• When connecting to a wireless LAN with the Connection Mode
setting set to Advanced or connecting to a wired LAN
s Network > Network Configuration > Wireless LAN >
Connection Mode
• You can also control the projector using a Web browser through the
Epson iProjection (iOS/Android) app.
a Make sure the projector is turned on.
b Make sure your computer or device is connected to the same network
as the projector.
c Start your Web browser on the computer or device.
d Go to the Epson Web Control screen by entering the projector's IP
address into the browser's address box. When entering an IPv6 address,
wrap the address with [ and ].
You see the Epson Web Control screen.
Controls the projector remotely.
A
Selects the playlist you want to play, and allows you to create or edit
B
playlists.
Displays the Time Table screen.
C
Operates the projector's menu settings with your finger or mouse.
D
Displays a test pattern.
E
Sets detailed projector settings.
F
Sets projector settings.
G
Registers or deletes the data for a playlist on the SD card.
H
96