Using Multiple Projectors; Projector Identification System For Multiple Projector Control; Setting The Projector Id - Epson EV-110 User Manual

Using Multiple Projectors

You can combine the projected images from two or more projectors to create
one unified image area.
• We recommend adjusting the projection angle and setting the focus
and zoom at least 20 minutes after you start projecting, because
images are not stable right after turning on the projector.
a
• If the values for Keystone are large, it can be difficult to adjust the
image position for overlapping images.
• In some cases the brightness and color tone may not match
completely even after correction.
• If brightness and color tone differences become more noticeable over
time, repeat the adjustments.
For best results, select settings and adjustments for multiple projector images
in this order:

• Setting the Projector ID

• Adjusting Color Uniformity
• Blending the Image Edges
• Matching the Image Colors
• Scaling an Image
g g Related Links
• "Projector Identification System for Multiple Projector Control"
• "Adjusting Color Uniformity"
• "Blending the Image Edges" p.70
• "Matching the Image Colors"
p.69
p.71
• "Scaling an Image"
Projector Identification System for Multiple Projector
Control
When lining up multiple projectors to project images, you can correct the
brightness and color tone of each projector's image so that the images match
closely.
You can set a unique projector ID for each projector to operate them
individually using a remote control, and then correct the brightness and color
for each projector.
g g Related Links
• "Setting the Projector ID"
• "Selecting the Projector You want to Operate"
Setting the Projector ID
To control multiple projectors from a remote control, give each projector a
unique ID.
a Press the [Menu] button, select the Extended menu, and press [Enter].
Select Multi-Projection and press [Enter].
b
c Select Projector ID and press [Enter].
p.67
p.72
p.67
p.68
67