Image Aspect Ratio; Changing The Image Aspect Ratio; Available Image Aspect Ratios - Epson EV-110 User Manual

Image Aspect Ratio

The projector can display images in different width-to-height ratios called
aspect ratios. Normally, the input signal from your video source determines
the image's aspect ratio.
If you always want to use a particular aspect ratio for a certain video input
source, you can select it using the projector's Signal menu.
g g Related Links
• "Changing the Image Aspect Ratio"
• "Available Image Aspect Ratios"
• "Projected Image Appearance with Each Aspect Mode"
• "Input Signal Settings - Signal Menu"

Changing the Image Aspect Ratio

You can change the aspect ratio of the displayed image.
a Turn on the projector and switch to the image source you want to use.
b
Press the [Menu] button on the remote control.
c Select the Signal menu and press [Enter].
p.49
p.49
p.50
p.123
d Select Aspect and press [Enter].
e Select one of the available aspect ratios for your input signal and press
[Enter].
f Press [Menu] or [Esc] to exit the menus.

Available Image Aspect Ratios

You can select the following image aspect ratios, depending on the input
signal from your image source.
• The aspect ratio setting is available only for HDMI image sources.
• The available aspect ratio setting varies depending on the input
a
signal.
• Note that using the aspect ratio function of the projector to reduce,
enlarge, or split the projected image for commercial purposes or for
public viewing may infringe upon the rights of the copyright holder
of that image based on copyright law.
Aspect mode Description
Auto Automatically sets the aspect ratio according to the
input signal and the Resolution setting.
16:9 Converts the aspect ratio of the image to 16:9.
49