Assembling; Mounting The Device On A Din Rail - Siemens SIRIUS 3TK2810-1 Manual

Assembling

5.1

Mounting the device on a DIN rail

Requirements
• At the installation location, a horizontal 35 mm mounting rail in accordance with
DIN EN 60715 is properly secured
• Please observe the information about the mounting position in Chapter "Technical data
(Page 71)"
DIN rail mounting procedure
Step
3TK2810-1 safety-related speed monitor
Equipment Manual, 05/2020, NEB926246402000/RS-AE/007
Operating instruction
1 Hang the back of the device onto the upper edge of
the DIN rail
2 Press the lower half of the device against the DIN rail
until the device engages
5
Figure
37