Lock Changes; Change Tracking Of Parameterization - Siemens SIRIUS 3TK2810-1 Manual

Operation
7.2 Parameterizing/configuring
Hazardous Voltage.
Can Cause Death, Serious Injury, or Property Damage.
Carry out functional test of the system
To guarantee the safety of the system, a full functional test must be carried out and successfully
concluded following parameterization.
Note
You must document the set parameters with the printed form (see Chapter "Appendix
(Page 79)").
7.2.3

Lock changes

By activating the menu item "Lock changes", no more changes to the parameters can be made.
It is not possible to cancel this parameter. It is only possible to reset to factory settings and to re-
enter all parameters.
Change tracking is also automatically activated when "Lock changes" is activated.
7.2.4

Change tracking of parameterization

The menu item "Change tracking" is available in order to be able to recognize any changes that
have been made subsequently to the parameterization. In this menu a counter can be activated
once. It is then incremented with every future change. Once the counter has been activated, it
is no longer possible for the user to reset or deactivate the counter.
50
▲
▲
WARNING
3TK2810-1 safety-related speed monitor
Equipment Manual, 05/2020, NEB926246402000/RS-AE/007